Minispace 5069

The Minispace 5069 is a compact seat that stands out for its elegance and aesthetics. This seat is an optimal solution for conference centres, auditoriums, corporate rooms and VIP areas of stadiums and arenas.

This beam-mounted seat has a folding system that consists of the seat turning and the backrest moving forward until both are lying completely flat against each other. Once the seat is folded, the depth is only 24cm, which enables maximum optimization of space.

The folding mechanism has a Controlled Soft Rise Technology System that avoids noise or blows when the seat is unoccupied. The folding relies on gravity, achieving high durability and minimal maintenance.

The seat and backrest consist of two blocks of moulded polyurethane foam and have an internal structure of injected ABS with an upholstery fully integrated into the foam with help of the Integral Form system, without any seams or stitching.

Cushions are protected by a polyamide shell in order to prevent possible deterioration due to daily and heavy use. The seat shell incorporate rear perforations which provide adequate acoustic absorption.

The armrests are made of a metal structure covered in semi-rigid, cold moulded integral polyurethane foam. Seat, backrest and armrest are supported by painted cast aluminium sides and fixed to a steel tube structure.

Description

The Minispace 5069 is a compact seat that stands out for its elegance and aesthetics. This seat is an optimal solution for conference centres, auditoriums, corporate rooms and VIP areas of stadiums and arenas.

This beam-mounted seat has a folding system that consists of the seat turning and the backrest moving forward until both are lying completely flat against each other. Once the seat is folded, the depth is only 24cm, which enables maximum optimization of space.

The folding mechanism has a Controlled Soft Rise Technology System that avoids noise or blows when the seat is unoccupied. The folding relies on gravity, achieving high durability and minimal maintenance.

The seat and backrest consist of two blocks of moulded polyurethane foam and have an internal structure of injected ABS with an upholstery fully integrated into the foam with help of the Integral Form system, without any seams or stitching.

Cushions are protected by a polyamide shell in order to prevent possible deterioration due to daily and heavy use. The seat shell incorporate rear perforations which provide adequate acoustic absorption.

The armrests are made of a metal structure covered in semi-rigid, cold moulded integral polyurethane foam. Seat, backrest and armrest are supported by painted cast aluminium sides and fixed to a steel tube structure.

Optional,USB, PL, F48, F1000, Wooden armrests, Upholstered shell
Design Center

Design Center

The Figueras International Seating Design Center is located in one of the halls of the brand's production factory. In this way, there is a tangible link between the process of designing the products a…

Technical data and Dimensions

  • When folded, the seat occupies only 24 cm.
  • Available in modules of 2, 3 or 4 seats.
  • Seats are anchored to the floor by means of expansion plugs or other type of fixations.
  • Curved rows are possible.
  • Optionally, the armrest can be made of wood.
  • Optionally, shells can be made with a Technowood finish.
  • Together with the LP, F-48 and F-1000 tables, it becomes an optimal solution for long working sessions.
  • Fire standards: complies with international regulations.

Downloads

CONFIGURATOR

Configure a seat

PROJECTS

with the Minispace 5069

Muxikebarri – Centro de Arte, Cultura y Congresos

Muxikebarri – Centro de Arte, Cultura y Congresos

Getxo, SPAIN

RELATED PRODUCTS

Stay connected
with Figueras

Your hub for inspiring projects and updates.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.